Online catalogue

TRIPOND Hardener for Pond Liner Liquid

TRIPOND Hardener for Pond Liner Liquid is a low-viscosity reactive component for the chemical hardening of TRIPOND Pond Liner Liquid. The hardener shortens the drying and curing time and supports a resistant coating in pond construction.

The additive facilitates processing when brushing, rolling or airless spraying and is particularly suitable for garden and ornamental ponds where a stable and resilient seal is required.

Unsure about applying liquid pond liner?

Substrate, surface area, layer construction, mixing ratio, and processing temperature all influence the outcome of pond sealing. Aqualogistik is happy to assist you with selecting the appropriate system components for your project.

Request pond sealing for your project

In stock

TRIPOND Hardener for pond liner, liquid, as a reactive component for durable pond seals

TRIPOND liquid pond liner hardener is used as the reactive component for processing TRIPOND liquid pond liner. The addition of the hardener aids the chemical curing of the coating, which shortens drying and curing times and increases the mechanical resistance of the cured surface.

The mixture is suitable for sealing work in pond construction, especially for garden and ornamental ponds with increased requirements for stability, processing reliability, and durability. At the same time, the coating becomes more fluid, which can facilitate application with a roller, brush, or airless spray method.

The hardener is processed as a liquid in the correct mixing ratio with TRIPOND pond liner. For a clean result, the substrate, processing temperature, processing time, and drying time should be carefully observed.

Scope of delivery

  • TRIPOND liquid hardener for pond liners in the chosen version

The exact scope of delivery depends on the chosen container size. TRIPOND liquid pond sealant is available separately and must be planned according to the intended area and mixing ratio.

Technical Specifications

The following technical details relate to TRIPOND liquid pond liner hardener and assist with the planning and processing of the coating.

Property Specification
Product type Reactive component / hardener
Application For TRIPOND liquid pond liner
Processing Brushing, Rolling, Airless spraying
Mixing ratio 3 : 1
Processing temperature 5 °C to 25 °C
Drying time per coat approx. 6 – 12 hours
Mixture processing time Max. 2 hours
Colour Pale yellow
Consistency Low viscosity
Water hazard class WGK 1
GISCODE BBP 20
Available finishes 5 litres, 10 litres

Area of use and application

  • Reactive component for TRIPOND pond liner liquid
  • Pond sealing for garden and ornamental ponds
  • Waterproofing work with increased demands on stability and durability
  • Application by brushing, rolling or airless spraying
  • Suitable for reducing the drying and curing time of the coating

The theoretical coverage depends on the amount of TRIPOND liquid pond liner used. By adding the hardener, the total workable amount increases according to the mixing ratio of 3:1.

Advantages and special features

  • Does the chemical curing of TRIPOND pond liner support liquid
  • Shortens the drying and curing time of the coating
  • Increases the mechanical resistance of the cured surface
  • Improves resistance to sunlight and diluted acids and alkalis
  • Facilitates processing due to a thinner consistency
  • Suitable for brushing, rolling and airless spraying

The hardener is particularly useful when the liquid pond liner is to be processed into a more durable and faster-curing coating.

Compatibility and accessories

The hardener is matched to processing with TRIPOND pond liner liquid. For a suitable processing result, both components should be dosed appropriately and used in accordance with the processing instructions.

Suitable accessories TRIPOND Liquid Pond Liner

Assembly and installation instructions

Mixing and processing time

The hardener is processed in liquid form with TRIPOND pond liner at the specified mixing ratio. The prepared mixture should be processed within the specified processing time.

Temperature and underground

Processing should take place within the specified temperature range. The substrate must be suitable for coating, stable and prepared accordingly.

Order process

The mixture can be applied by brushing, rolling or airless spraying depending on the project and surface. For uniform results, layer build-up, drying time and material quantity should be carefully planned.

In a nutshell

Legal notices

Safety notice

TRIPOND Härter for Pond Liner Liquid is a solvent-based reactive component. Processing, storage, and disposal must only be carried out in compliance with the container labelling, the current safety data sheet, and locally applicable regulations.

During processing and curing, ensure good and sufficient ventilation. Keep away from ignition sources, open flames, and hot surfaces. Keep out of reach of children.

Wear suitable protective gloves, protective clothing, eye protection and face protection. Avoid contact with eyes, skin and clothing. Keep container tightly closed after use and store in a well-ventilated place.

The specified mixture of TRIPOND liquid pond liner and TRIPOND hardener must be processed within the stated processing time. Mixtures that can no longer be processed, product residues, and contaminated work equipment must be disposed of in accordance with applicable regulations.

Do not allow product residue to enter waterways, sewage systems or soil. For acute severe symptoms, fire, accident or immediate life-threatening danger, call emergency number 112. Further information on the Berlin-Brandenburg Poison Control Centre can be found at Charité Poison Control Centre.

Manufacturer Information

TRIPOND liquid pond liner hardener is used as a system component for TRIPOND liquid pond liner. The product is intended for sealing work in pond construction and supports the chemical hardening of the liquid coating.

For reliable processing, the mixing ratio, processing temperature, processing time and drying time must be observed according to the product specifications.

Responsible person

Aqualogistik GmbH Delecker Weg 30 59519 Möhnesee Germany

Request product catalogue

Order our printed catalogue for free by post.

It is aimed at specialist dealers, landscaping businesses, pond builders and private customers who want a comprehensive overview of our product range.

The catalogue contains detailed product descriptions, technical specifications and application areas – everything you need for your planning.

Please fill in the form and we will send out your catalogue by post as quickly as possible.

Want to get to it quicker? You can find our digital versions in the download area: → Download PDF catalogue or browse our flip catalogue online

Navigation

Product categories

Order conveniently from one of our premium online partners 2
Koi and Co
Premium Online Shop
Assortment
Full range
Pond Environment
Premium Online Shop
Assortment
Full range
Order conveniently from one of our premium online partners 2
Koi and Co
Premium Online Shop
Assortment
Full range
Pond Environment
Premium Online Shop
Assortment
Full range
JPD Design Pet
1

2

3